Screed Reinforcement Carbon Steel Wire Mesh 100mm X 100mm 1.4 - 1.7mm Thinckness

Screed Reinforcement Carbon Steel Welded Wire Mesh Roll, Wire Thickness 1.4 - 1.7mm, 50mm X 50mm, 100mm X 100mm

Screed reinforcement welded wire mesh with square opening is primarily made of low-carbon drawn wire, the color is black, located in mutually perpendicular directions and interconnected by spot welding. If used in corrosion material, galvanzied surface treatment after welding should be the best choice.

Reinforcing welded mesh can be used to strengthen any screed. This is a universal element that is used when pouring floors and plastering of walls, during finishing works. It should be usded to make the floor smooth, to prevent cracks, chipping during drying and shrinkage of the floor, and if the future floor will be subjected to heavy loads, when reinforcing the mesh is fixed above the surdace of the floor and covered with concrete mix.

Reinforcing welded wire mesh has the following features:

• promotes uniform disturbution of the load on the floor;
• prevents the formation of the chips and cracks on the screed;
• increases the density of the concrete composition;
• saves concrete fron destruction and deformations;
• ideal for floors with large differences.

Specification:

• Materials: low carbon steel wire
• Surface finish: no finished, electro galvanized, or hot dipped galvanzied.
• Wire diameter: 0.9mm - 2.0mm.
• Roll height: 1m
• Roll length: 50m, 100m.
• Mesh size: 50mm x 50mm, 100mm x 100mm.​

​

Packing & Loading:

• Wrap with plastic film
• With labels
• All bulk in container

1.4mm Screed Reinforcement Mesh

Carbon Steel 1.4mm Screed Reinforcement Mesh

galvanized 1.4mm Screed Reinforcement Mesh

Screed Reinforcement Carbon Steel Wire Mesh 100mm X 100mm 1.4 - 1.7mm Thinckness Images